1. 2 x DDR3 DIMM sockets supporting up to 64 GB of system memory
2. Dual channel memory architecture
3. Support for DDR3 2400(OC)/2133/1866/1600/1333 MHz memory modules
4. Support for AMD Memory Profile (AMP)/ Extreme Memory Profile (XMP) memory modules

(Please refer “Memory Support List” for more information.)

1. 1. 1 x D-Sub port, supporting a maximum resolution of 1920×1200
   2. 1 x HDMI port, supporting a maximum resolution of 4096×2160

* The resolution of 4096×2160 can be supported when using an FM2+ APU; the maximum resolution supported is 1920×1200 when using an FM2 APU.
* Support for HDMI 1.4a version.

1. Maximum shared memory of 2 GB

1. 1. Realtek® ALC887 codec
   2. High Definition Audio
   3. 2/4/5.1/7.1-channel

* To configure 7.1-channel audio, you have to use an HD front panel audio module and enable the multi-channel audio feature through the audio driver.

1. Support for S/PDIF Out

1. 1. 1 x PCI Express x16 slot, running at x16

(The PCI Express x16 slot conforms to PCI Express 3.0 standard.)
* To support PCI Express 3.0, you must install an FM2+ APU.

1. 1. 1 x PCI Express x1 slot

(The PCI Express x1 slot conforms to PCI Express 2.0 standard.)

1. 1 x PCI slot

1. 4 x SATA 6Gb/s connectors
2. Support for RAID 0, RAID 1, RAID 10, and JBOD

1. 2 x USB 3.0/2.0 ports on the back panel
2. 8 x USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through the internal USB headers)

1. 1 x 24-pin ATX main power connector
2. 1 x 4-pin ATX 12V power connector
3. 4 x SATA 6Gb/s connectors
4. 1 x APU fan header
5. 2 x system fan headers
6. 1 x front panel header
7. 1 x front panel audio header
8. 1 x S/PDIF Out header
9. 2 x USB 2.0/1.1 headers
10. 1 x speaker header
11. 1 x Clear CMOS jumper
12. 1 x chassis intrusion header

1. 1 x PS/2 keyboard/mouse port
2. 1 x D-Sub port
3. 1 x HDMI port
4. 2 x USB 3.0/2.0 ports
5. 4 x USB 2.0/1.1 ports
6. 1 x RJ-45 port
7. 3 x audio jacks (Line In, Line Out, Mic In)

1. 1. System voltage detection
   2. APU/System temperature detection
   3. APU/System fan speed detection
   4. APU overheating warning
   5. APU/System fan fail warning
   6. APU/System fan speed control

* Whether the fan speed control function is supported will depend on the cooler you install.

1. 1 x 64 Mbit flash
2. Use of licensed AMI UEFI BIOS
3. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0

1. 1. Support for @BIOS
   2. Support for Q-Flash
   3. Support for Xpress Install
   4. Support for EasyTune

* Available functions in EasyTune may differ by motherboard model.

1. Support for Smart Recovery 2
2. Support for ON/OFF Charge

1. 1. Support for Windows 8.1/7 32-bit/64-bit
   2. Support for Windows XP 32-bit

* To support Windows XP 32-bit, you must install an AMD FM2+ Kaveri APU.
* It requires Service Pack 3 to support Windows XP driver installation.