Technical Details
CPU | 1. Support for Intel® Coreâ„¢ i7 processors/Intel® Coreâ„¢ i5 processors/Intel® Coreâ„¢ i3 processors/Intel® Pentium® processors/Intel® Celeron® processors in the LGA1155 package 2. L3 cache varies with CPU (Some Intel® Coreâ„¢ processors require a graphic card, please refer “CPU support List” for more information.) |
Chipset | Intel® B75 Express Chipset |
Memory | 2 x DDR3 DIMM sockets supporting up to 16 GB of system memory * Due to a Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than the size of the physical memory installed. Dual channel memory architecture Support for DDR3 1600/1333/1066/800 MHz memory modules Support for non-ECC memory modules Support for Extreme Memory Profile (XMP) memory modules * To support XMP memory, you must install an Intel® 22nm (Ivy Bridge) CPU.(Please refer “Memory Support List” for more information.) |
Onboard Graphics | Integrated Graphics Processor: 1 x D-Sub port, supporting a maximum resolution of 1920×1200 (Maximum shared memory of 1 GB) |
Audio | Realtek ALC887 codec, High Definition Audio, 2/4/5.1/7.1-channel * To configure 7.1-channel audio, you have to use an HD front panel audio module and enable the multi-channel audio feature through the audio driver. |
LAN | Realtek GbE LAN chip (10/100/1000 Mbit) |
Expansion Slots | 1 x PCI Express x16 slot, running at x16 (The PCI Express x16 slot conforms to PCI Express 3.0 standard.) * Whether PCI Express 3.0 is supported depends on CPU and graphics card compatibility. 1 x PCI Express x1 slot (The PCI Express x1 slot conforms to PCI Express 2.0 standard.) |
Storage Interface | Chipset: 4 x SATA 3Gb/s connectors |
USB | Chipset: 8 x USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through the internal USB headers) |
Internal I/O Connectors | 1 x 24-pin ATX main power connector, 1 x 4-pin ATX 12V power connector, 4 x SATA 3Gb/s connectors, 1 x CPU fan header, 1 x system fan header, 1 x front panel header, 1 x front panel audio header, 2 x USB 2.0/1.1 headers, 1 x speaker header, 1 x chassis intrusion header, 1 x Clear CMOS jumper |
Back Panel Connectors | 1 x PS/2 mouse port, 1 x PS/2 Keyboard port, 1 x D-Sub port, 4 x USB 2.0/1.1 ports, 1 x RJ-45 port, 3 x audio jacks (Line In, Line Out, Mic In) |
I/O Controller | iTE I/O Controller Chip |
BIOS | 1 x 32 Mbit flash, Use of licensed AMI UEFI BIOS, PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0 |
Operating System | Support for Windows 10/8.1/7 |