CPU |
LGA1200 package: |
|
1. 11th Generation Intel Core i9 processors / Intel Core i7 processors / Intel Core i5 processors |
|
2. 10th Generation Intel Core i9 processors / Intel Core i7 processors / Intel Core i5 processors / Intel Core i3 processors/ Intel Pentium processors / Intel Celeron processors* |
|
* Limited to processors with 4 MB Intel Smart Cache, Intel Celeron G5xx5 family. |
|
3. L3 cache varies with CPU |
|
(Please refer to “CPU Support List” for more information.) |
Chipset |
1. Intel Z590 Express Chipset |
Memory |
1. 11th Generation Intel Core i9/i7/i5 processors: |
|
Support for DDR4 5333(O.C.) / DDR4 5133(O.C.) / DDR4 5000(O.C.) / 4933(O.C.) / 4800(O.C.) / 4700(O.C.) / 4600(O.C.) / 4500(O.C.) / 4400(O.C.) / 4300(O.C.) / 4266(O.C.) / 4133(O.C.) / 4000(O.C.) / 3866(O.C.) / 3800(O.C.) / 3733(O.C.) / 3666(O.C.) / 3600(O.C.) / 3466(O.C.) / 3400(O.C.) / 3333(O.C.) / 3300(O.C.) / 3200 / 3000 / 2933 / 2800 / 2666 / 2400 / 2133 MHz |
|
2. 10th Generation Intel Core i9/i7 processors: |
|
Support for DDR4 2933/2666/2400/2133 MHz memory modules |
|
3. 10th Generation Intel Core i5/i3/Pentium/Celeron processors: |
|
Support for DDR4 2666/2400/2133 MHz memory modules |
|
4. 4 x DDR4 DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity) of system memory |
|
5. Dual channel memory architecture |
|
6. Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode) |
|
7. Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules |
|
8. Support for Extreme Memory Profile (XMP) memory modules |
|
(Go to GIGABYTE’s website for the latest supported memory speeds and memory modules.) |
Onboard Graphics |
Integrated Graphics Processor-Intel HD Graphics support: |
|
1. 1 x DisplayPort, supporting a maximum resolution of 4096×2304@60 Hz |
|
* Support for DisplayPort 1.2 version and HDCP 2.3 |
|
(Graphics specifications may vary depending on CPU support.) |
Audio |
1. Realtek Audio CODEC |
|
2. High Definition Audio |
|
3. 2/4/5.1/7.1-channel |
|
* To configure 7.1-channel audio, you need to open the audio software and select Device advanced settings > Playback Device to change the default setting first. Please visit GIGABYTE’s website for details on configuring the audio software. |
|
4. Support for S/PDIF Out |
LAN |
1. Realtek GbE LAN chip (1 Gbit/100 Mbit) |
Expansion Slots |
1. 1 x PCI Express x16 slot, running at x16 (PCIEX16) |
|
* For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot. |
|
(The PCIEX16 slot conforms to PCI Express 4.0 standard.) (Note) |
|
2. 2 x PCI Express x16 slots, running at x4 (PCIEX4_1, PCIEX4_2) |
|
3. 2 x PCI Express x1 slots (PCIEX1_1, PCIEX1_2) |
|
(The PCIEX4 and PCIEX1 slots conform to PCI Express 3.0 standard.) |
Multi-Graphics Technology |
1. Support for AMD Quad-GPU CrossFire and 2-Way AMD CrossFire technologies |
Storage Interface |
CPU: |
|
1. 1 x M.2 connector (Socket 3, M key, type 2260/2280/22110 PCIe 4.0 x4/x2 SSD support) (M2P_CPU) (Note) |
|
Chipset: |
|
1. 1 x M.2 connector (Socket 3, M key, type 2260/2280/22110 SATA and PCIe 3.0 x4/x2 SSD support) (M2A_SB) |
|
2. 6 x SATA 6Gb/s connectors |
|
Support for RAID 0, RAID 1, RAID 5, and RAID 10 |
|
* Refer to “1-7 Internal Connectors,” for the installation notices for the M.2 and SATA connectors. |
|
Intel Optane Memory Ready |
USB |
Chipset: |
|
1. 8 x USB 3.2 Gen 1 ports (6 ports on the back panel, 2 ports available through the internal USB header) |
|
2. 4 x USB 2.0/1.1 ports available through the internal USB headers |
Internal I/O Connectors |
1. 1 x 24-pin ATX main power connector |
|
2. 1 x 8-pin ATX 12V power connector |
|
3. 1 x 4-pin ATX 12V power connector |
|
4. 1 x CPU fan header |
|
5. 3 x system fan headers |
|
6. 1 x addressable LED strip header |
|
7. 1 x RGB LED strip header |
|
8. 2 x M.2 Socket 3 connectors |
|
9. 6 x SATA 6Gb/s connectors |
|
10. 1 x front panel header |
|
11. 1 x front panel audio header |
|
12. 1 x S/PDIF Out header |
|
13. 1 x USB 3.2 Gen 1 header |
|
14. 2 x USB 2.0/1.1 headers |
|
15. 2 x Thunderbolt add-in card connectors |
|
16. 1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 module only) |
|
17. 1 x serial port header |
|
18. 1 x Clear CMOS jumper |
|
19. 1 x Q-Flash Plus button |
|
All fan headers are subject to support AIO_Pump, Pump and high performance fan with the capability of delivering up to 2A/12V@4W. |
Back Panel Connectors |
1. 1 x PS/2 mouse port |
|
2. 1 x PS/2 Keyboard port |
|
3. 1 x DisplayPort |
|
4. 6 x USB 3.2 Gen 1 ports |
|
5. 1 x RJ-45 port |
|
6. 3 x audio jacks |
I/O Controller |
1. iTE I/O Controller Chip |
H/W Monitoring |
1. Voltage detection |
|
2. Temperature detection |
|
3. Fan speed detection |
|
4. Fan fail warning |
|
5. Fan speed control |
|
* Whether the fan speed control function is supported will depend on the cooler you install. |
BIOS |
1. 1 x 256 Mbit flash |
|
2. Use of licensed AMI UEFI BIOS |
|
3. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0 |
Unique Features |
1. Support for APP Center |
|
* Available applications in APP Center may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications. |
|
@BIOS |
|
EasyTune |
|
Fast Boot |
|
Game Boost |
|
ON/OFF Charge |
|
RGB Fusion |
|
Smart Backup |
|
System Information Viewer |
|
2. Support for Q-Flash Plus |
|
3. Support for Q-Flash |
|
4. Support for Xpress Install |
Bundled Software |
1. Norton Internet Security (OEM version) |
|
2. Realtek 8118 Gaming LAN Bandwidth Control Utility |
Operating System |
1. Support for Windows 10 64-bit |
Form Factor |
1. ATX Form Factor; 30.5cm x 24.4cm |
Note |
1. Supported by 11th Generation processors only. |
Remark |
1. Due to different Linux support condition provided by chipset vendors, please download Linux driver from chipset vendors’ website or 3rd party website. |
|
2. Most hardware/software vendors may no longer offer drivers to support Win9X/ME/2000/XP. If drivers are available from the vendors, we will update them on the GIGABYTE website. |