Arctic MX-7 4g Thermal Paste With MX Cleaner

The MX-7 is characterized by a dense, viscous Consistency resulting from a high filler content, which delivers optimal thermal performance. Due to its special texture, the paste cannot be spread with a spatula.

Long Durability

The high cohesion ensures a stable composition and guarantees long-lasting, consistent performance without drying out.

Even Distribution

The low adhesion allows for optimal distribution into a fine bond line and ensures maximum heat transfer.

No Pump-Out Effect

High cohesion prevents cracks or leakage even during repeated thermal cycles with high thermal stress.

Easy Cross Application

Apply MX-7 in a simple cross pattern. The contact pressure of the cooler spreads the paste evenly across the entire surface, ensuring complete coverage and easy handling.

Perfect Layer Spread

When mounted, the cooler distributes the thermal paste evenly across the entire contact surface, creating a thin, uniform layer without air pockets.

Safe & Universally Applicable

MX-7 is suitable for CPUs, GPUs, laptops, console processors, and more. It is non-capacitive and electrically non-conductive, ensuring excellent performance without any risk of short circuits or electrical discharge.

Tired of Cleaning Old Paste?

MX Cleaner removes old thermal paste without leaving any residue and thoroughly cleans the contact surfaces. Also available as a practical bundle with MX-7.

After applying enough paste, tilt the syringe to prevent stringing.

Too much paste? Just wipe it off, as MX-7 is non-conductive and can’t cause short circuits.

Even for coolers with direct-touch heat pipes, we recommend applying the paste in a cross pattern, so that it reliably fills even the smallest grooves.

General Specifications

• Viscosity: 35.000 - 38.000 poise

• Density: 2.9 g/cm³

• Continuous Use Temperature: -50~250 ℃

• Volume Resistivity: 1.7 x 1012 Ω-cm

• Breakdown Voltage: 4.2 kV/mm

• Thermal Conductivity: FAQ

• Colour: Grey